Software › MicroPython REPL (Hazard3 RISC-V)

MicroPython REPL (Hazard3 RISC-V)

The official, unmodified MicroPython firmware for the Raspberry Pi Pico 2 (RP2350), Hazard3 RISC-V build (v1.28.0), loaded from its .uf2 image. The RP2350 can boot either its Arm Cortex-M33 cores or its open-hardware Hazard3 RISC-V cores; this is the same MicroPython release compiled for RISC-V. It boots to the same >>> REPL over USB-CDC and reports itself as "Raspberry Pi Pico2 with RP2350-RISCV". Real RV32 machine code single-steps in the debugger with the RISC-V disassembler.

Download ↓ Original source ↗

Format: MicroPython UF2 (RPI_PICO2-RISCV v1.28.0), base64  ·  By: Damien George and the MicroPython contributors  ·  Licence: MIT (MicroPython) — see micropython.org