Machines › Computers › Remington Rand › UNIVAC I
UNIVAC I
1951
The 1951 Eckert-Mauchly decimal computer sold by Remington Rand, with 1000 words in mercury delay lines, tape and a typewriter console, where a word is only there when it comes round.
UNIVAC I Online Emulator
Play UNIVAC I using JavaScript directly in your browser.
Controls
Supervisory Control is live: click any switch, button or key. The typewriter keyboard takes your own keys while Input Ready is lit: type twelve characters, then Enter for Word Release; Escape or Backspace is Erase. When it is not waiting, Space or Enter is the Start Bar, Escape the Stop switch and I the Initial Read switch. To run a tape: pick the UNISERVO with the Initial Tape Selector, raise Initial Read, wait for the IR timer, then Start Bar. To stop anywhere, turn Interrupted Operation to ONE INSTRUCTION, as the manual tells operators to. To look at memory, type with Output Selector M and a 50 order, or use the debugger. The SCI CR/FILL switch does the manual's SCIcr and Fill: at SCI CR, Start Bar, type a pair of instructions, Word Release, and Start Bar executes them; 000000U00325 sets C to 325. At FILL, Start Bar, then each word and Word Release goes in from C upward; set ONE INSTRUCTION before the last word. SPEED and LOAD are the emulator's own: 1/1000 lets you watch the words come round, and LOAD takes a tape as text for the selected UNISERVO.
Supervisory Control is live: click any switch, button or key. The typewriter keyboard takes your own keys while Input Ready is lit: type twelve characters, then Enter for Word Release; Escape or Backspace is Erase. When it is not waiting, Space or Enter is the Start Bar, Escape the Stop switch and I the Initial Read switch. To run a tape: pick the UNISERVO with the Initial Tape Selector, raise Initial Read, wait for the IR timer, then Start Bar. To stop anywhere, turn Interrupted Operation to ONE INSTRUCTION, as the manual tells operators to. To look at memory, type with Output Selector M and a 50 order, or use the debugger. The SCI CR/FILL switch does the manual's SCIcr and Fill: at SCI CR, Start Bar, type a pair of instructions, Word Release, and Start Bar executes them; 000000U00325 sets C to 325. At FILL, Start Bar, then each word and Word Release goes in from C upward; set ONE INSTRUCTION before the last word. SPEED and LOAD are the emulator's own: 1/1000 lets you watch the words come round, and LOAD takes a tape as text for the selected UNISERVO.
Supervisory Control is live: click any switch, button or key. The typewriter keyboard takes your own keys while Input Ready is lit: type twelve characters, then Enter for Word Release; Escape or Backspace is Erase. When it is not waiting, Space or Enter is the Start Bar, Escape the Stop switch and I the Initial Read switch. To run a tape: pick the UNISERVO with the Initial Tape Selector, raise Initial Read, wait for the IR timer, then Start Bar. To stop anywhere, turn Interrupted Operation to ONE INSTRUCTION, as the manual tells operators to. To look at memory, type with Output Selector M and a 50 order, or use the debugger. The SCI CR/FILL switch does the manual's SCIcr and Fill: at SCI CR, Start Bar, type a pair of instructions, Word Release, and Start Bar executes them; 000000U00325 sets C to 325. At FILL, Start Bar, then each word and Word Release goes in from C upward; set ONE INSTRUCTION before the last word. SPEED and LOAD are the emulator's own: 1/1000 lets you watch the words come round, and LOAD takes a tape as text for the selected UNISERVO.
Supervisory Control is live: click any switch, button or key. The typewriter keyboard takes your own keys while Input Ready is lit: type twelve characters, then Enter for Word Release; Escape or Backspace is Erase. When it is not waiting, Space or Enter is the Start Bar, Escape the Stop switch and I the Initial Read switch. To run a tape: pick the UNISERVO with the Initial Tape Selector, raise Initial Read, wait for the IR timer, then Start Bar. To stop anywhere, turn Interrupted Operation to ONE INSTRUCTION, as the manual tells operators to. To look at memory, type with Output Selector M and a 50 order, or use the debugger. The SCI CR/FILL switch does the manual's SCIcr and Fill: at SCI CR, Start Bar, type a pair of instructions, Word Release, and Start Bar executes them; 000000U00325 sets C to 325. At FILL, Start Bar, then each word and Word Release goes in from C upward; set ONE INSTRUCTION before the last word. SPEED and LOAD are the emulator's own: 1/1000 lets you watch the words come round, and LOAD takes a tape as text for the selected UNISERVO.
Configurations
| Configuration | Emulator | Machine | OS | Legal | |
|---|---|---|---|---|---|
| Latency demonstration (written for this site) | UNIVAC I | UNIVAC I | open | Open ⛶ | |
| Royal flush routine (1953 manual) | UNIVAC I | UNIVAC I | grey | Open ⛶ | |
| Demonstration routine of U-300 (Eckert-Mauchly, 1950) | UNIVAC I | UNIVAC I | grey | Open ⛶ | |
| Cleared memory, console only | UNIVAC I | UNIVAC I | open | Open ⛶ |
Downloads — ROMs & software
No downloads listed yet.
Chips
Emulators
| Emulator | Type | License | Site |
|---|---|---|---|
| UNIVAC I | online | MIT |